Jumat, 02 November 2012

Sukses  flash hp nokia 110 dengan usb menggunakan mx-key , meskipun agak ribet denhan solder langsung ke pcb nya , jadi ingat dulu waktu flashing hp china dengan ufs tornado hwk ori .. he he he

MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 4], SN: C060XXXX
Using device: USB Phonet  and HTI, FW ver: 00.50, SN: 0001XXXX
Connection status: UHCI:HUB::USB 1.10 (Full-speed)
Driver: nmwcdnsuc, ver: 7.1.32.70
Module ver: 1.0.0.21200(18-07-2012), Library ver: 1.0.0.14214(25-10-2012)
Make sure USB cable, Battery and charger are removed from device.

Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Device synchronized.
CPU: XGOLD 213
 Using embedded SBL from MCU.

Sending EBL Loader...OK
Sending EBL ...OK
Getting EBL Version ...
 Boot mode: 0xCC
 EBL version major/minor: 10.49
 EBL version: Quantum_Bootloader_10.49_M1S1
Protocol version suggested by phone: 3
Set baud rate to: 6.50 Mbit/s
Flash ID: 0089 8982 - 23280001 [Intel NU48F512,512 Mbits]
CFI information:
 Flash settings: 0/1024, size: 0x04000000
 1 Block regions:
  512 x 0x00020000 = 0x04000000
EBL ready !
Original IMEI: 35325905058508
IMEI_DATA saved OK
CCC_DATA saved OK
HWC_DATA saved OK
RPL saved to "C:\mobileEx\3.5\data\backup\XGOLD_35325905058508_back.RPL"
Processing file: rm827__03.04.mcusw
 Downloading item CODE:rm827__03.04.mcusw_ebl_psi.fls, num block: 4, size: 26 MB
Erasing area 0x40000000-0x4001FFFE ...OK
Programming completed in 0.344 s
Erasing area 0x40040000-0x4005FFFE ...OK
Programming completed in 0.469 s
Erasing area 0x40060000-0x4015FFFE ...OK
Programming completed in 1.593 s
Erasing area 0x40280000-0x41B3FFFE ...OK
Programming completed in 33.813 s
Checksum verified (0x74A0)
Processing file: rm827__03.04.ppm_s1
 Downloading item CUST:package_s1.ppm_ebl_psi.fls, num block: 1, size: 3.95 MB
Erasing area 0x41BC0000-0x41FB1DEA ...OK
Programming completed in 5.187 s
Checksum verified (0xF6CD)
Processing file: rm827__03.04.image_s1_059N2B2
 Downloading item CUST:package_s1_059N2B2.image.fls, num block: 1, size: 16.38 MB
Erasing area 0x421C0000-0x43E1FFFE ...OK
Programming completed in 23.203 s
Checksum verified (0x4CBD)
Total time for flashing process(boot+erase+write) was 7 min 5.343 s

untuk pin out  lihat disini ---solder langsung kabel usb ke pcb dari  kabel usb nya  , untuk pengganti battery bisa dengan menggunakan power supply,
DMCA.comjika belum punya firmware bisa download disini

3 comments:

 

Publisher